White transparent plastic block H0225 The viscosity of the product can be adjusted by temperature control.
This hot melt adhesive has high softening point and Low Surface Tack. It can peel off metal materials well and has certain toughness, which can play a good protective role for cutting edge protection.
Main ingredients | synthetic resin |
Appearance | Milky white solid glue |
Solid content | 100% |
smell | No odor or toxicity |
Brookfield viscosity: 170℃/CPS | 12500±2000 |
180℃/CPS | 6500±1200 |
190℃/CPS | 4000±800 |
Softening point (ASTM E-28) | 128℃±5 |
Recommended gluing method | Spray point, spinneret, roller coating, scraping coating |
- Parameters
Main ingredients | synthetic resin |
Appearance | Milky white solid glue |
Solid content | 100% |
smell | No odor or toxicity |
Brookfield viscosity: 170℃/CPS | 12500±2000 |
180℃/CPS | 6500±1200 |
190℃/CPS | 4000±800 |
Softening point (ASTM E-28) | 128℃±5 |
Recommended gluing method | Spray point, spinneret, roller coating, scraping coating |
Poduct Introduction:
This hot melt adhesive has high softening point and Low Surface Tack. It can peel off metal materials well and has certain toughness, which can play a good protective role for cutting edge protection.
Poduct Standard:
Main ingredients | synthetic resin |
Appearance | Milky white solid glue |
Solid content | 100% |
smell | No odor or toxicity |
Brookfield viscosity: 170℃/CPS | 12500±2000 |
180℃/CPS | 6500±1200 |
190℃/CPS | 4000±800 |
Softening point (ASTM E-28) | 128℃±5 |
Recommended gluing method | Spray point, spinneret, roller coating, scraping coating |
Attention:
In the operation of equipment, if it is necessary to feed in the hot melt adhesive tank, it shall be equipped with protective glasses and heat protective gloves and slowly feed to avoid splashing.
Products more than 1 hour in slot on melt when not in use, please send the temperature to 120 ℃ heat preservation and shall not be idle more than 3 hours, to avoid cracking.
Do not use the product if it turns yellow and is not transparent when it is used in the glue bath for a long time.
The viscosity of the product can be adjusted by temperature control.
Application:
Step 1: first remove the remaining glue in the rubber groove and wipe the remaining glue in the rubber groove with cloth.
Step 2: glue tank temperature about 80 ℃ or so, pour into a clean oil bath back out about 10 minutes to 30 minutes.
Step 3: take new hot melt adhesive glue slot, melt glue tank set a temperature of 180 ℃ after starting job in extrusion tube glue and glue tank into the new glue to normal use after the residual oil.
Packaging:
25 kg/carton,
Storage and Transportation:
Products should not be placed in high dust and direct sunlight exposure, humid, hot environment and away from the source of fire and heat.
Storage time: correct storage environment for at least one year.
Previous : Hot melt adhesive HA-2 H0223-HL-2 Used in the bonding of plastic good thermal stability and film toughness
Next : Hot melt adhesive-edge adhesive H0226 It has the characteristics of good fluidity Primarily applicable to various textbooks
Copy product links
Long by picture save/share
White transparent plastic block H0225 The viscosity of the product can be adjusted by temperature control.
INQUIRY
Add Successfully
At vero eos et accusamus et iusto elity agnissmos ducimus os quidtiis praesetium ptatum mole deeniti .
GET IN TOUCH
Address: M18-101, chemical zone, China south city, , shenzhen city, guangdong province, China.
Tell : (+86) 755-88834518
(Monday to Friday: 9:00-18:00)
Email : tanya@jitian168.com
Email : resin@jitian168.com
BUSINESS HOURS
Monday to Friday : 9 am to 6 pm
Saturday : 10 am to 4 pm
Sunday : Closed Support Hours in 24/7 Everyday
NEWS LETTER
Enter your email address for our mailing list to keep your self our lastest updated.
点击右上角
分享给朋友吧
© 2022 SHENZHEN JITIAN CHEMICAL CO.,LTD . All rights reserved Site Map
