Pure Acrylic Emulsion for Interior and Exterior Walls F13-0202 Eco-friendly characteristics
Pure acrylic emulsion for interior and exterior walls is meticulously crafted using acrylic ester monomers as the core raw material through advanced polymerization processes. Specifically designed to meet the high-quality coating demands of building exteriors and interiors, it delivers outstanding performance and consistent quality.
project | Parameter values | Testing standards |
appearance | Milky white liquid | Visual inspection method |
Solid Content | 50±1% | GB/T 1725-2007 |
Viscosity (3 # rotor/60rpm) | 50-500 mPa·s | Brookfield RV |
ph value | 7-9 | ISO 976 |
MFFT | 20 | ISO 2115 |
Glass transition temperature (Tg) | 25 | Actual film formation method |
- Parameters
project | Parameter values | Testing standards |
appearance | Milky white liquid | Visual inspection method |
Solid Content | 50±1% | GB/T 1725-2007 |
Viscosity (3 # rotor/60rpm) | 50-500 mPa·s | Brookfield RV |
ph value | 7-9 | ISO 976 |
MFFT | 20 | ISO 2115 |
Glass transition temperature (Tg) | 25 | Actual film formation method |
Description
Pure acrylic emulsion for interior and exterior walls is meticulously crafted using acrylic ester monomers as the core raw material through advanced polymerization processes. Specifically designed to meet the high-quality coating demands of building exteriors and interiors, it delivers outstanding performance and consistent quality.
Specification
project | Parameter values | Testing standards |
appearance | Milky white liquid | Visual inspection method |
Solid Content | 50±1% | GB/T 1725-2007 |
Viscosity (3 # rotor/60rpm) | 50-500 mPa·s | Brookfield RV |
ph value | 7-9 | ISO 976 |
MFFT | 20 | ISO 2115 |
Glass transition temperature (Tg) | 25 | Actual film formation method |
Features
1. Excellent adhesion and crack resistance;
2. Superior weather resistance and scrub resistance;
3. Outstanding application and film-forming properties;
4. Eco-friendly characteristics.
Application
Application Scenarios | Specific applications | Effect Description |
High-end building exteriors | Luxury Residential Exterior Wall Coatings Commercial Building Exterior Wall Painting Municipal Building Exterior Wall Decoration | Delivers long-lasting, vibrant decorative effects, withstands harsh weather conditions, elevates architectural quality and appearance, and extends the service life of building exteriors. |
Eco-friendly Interior Wall Coverings | Residential interior wall painting, kindergarten and school wall decoration, hospital ward wall finishing | Create healthy and eco-friendly indoor spaces with highly scrub-resistant surfaces for easy daily cleaning and disinfection. Enjoy long-lasting, fade-resistant colors that foster comfortable and aesthetically pleasing living and activity environments. |
Renovation and Refurbishment of Old Walls | Renovation of interior and exterior walls of older buildings; Restoration and painting of historic structures | Effectively covers imperfections on old walls, enhances adhesion for new coatings, gives old walls a fresh new look, while providing excellent protective performance. |
Special Function Coating | Exterior Wall Insulation Coating, Anti-Static Wall Coating | When combined with functional fillers as a base material, it imparts special properties to coatings, meeting the customized requirements of various buildings. |
Usage Instructions:
Coating Formulation Recommendations: In interior and exterior wall coating formulations, the recommended usage of this pure acrylic emulsion is 30%–50% (adjustable based on specific coating performance requirements, cost budgets, and other factors). When combined with high-quality pigments and fillers such as titanium dioxide, calcined kaolin, and ultrafine barium sulfate, along with complementary additives including dispersants, thickeners, defoamers, and film-forming aids, it enables the formulation of high-performance interior and exterior wall coatings.
Substrate Preparation:
Ensure walls are level, dry (moisture content <10%), clean, and free of oil, dust, loose particles, mold stains, etc.
For existing walls, thoroughly remove loose, peeling, or chalking sections. Level with putty and sand smooth. For new walls, apply a compatible pure acrylic emulsion primer to seal the surface, enhancing coating adhesion and alkali resistance.
Application Methods:
Spray Application:
Use an air compressor or airless sprayer. Maintain a 20–30 cm distance between the spray gun and the wall surface. Adjust air pressure to 0.3–0.5 MPa. Apply 2–3 coats using uniform, crisscross strokes. Allow 1–2 hours between coats (adjust based on ambient temperature and humidity) to ensure even coating thickness. Brush/Roller Application: Use a high-quality wool brush or short-nap roller. Apply evenly in one direction, avoiding back-and-forth strokes. Pre-coat edges, corners, and inside/outside angles to prevent missed areas. Apply 2-3 coats to achieve the desired finish.
Environmental Requirements: Application temperature ≥3°C (≥37°F), relative humidity ≤85%. Avoid application during rainy, windy, or high-temperature conditions with direct sunlight. For winter application, perform during midday when temperatures are higher and implement frost protection measures.
Package
50 kg per drum
REMARK |
The above information is believed to be accurate and presents the best explanation currently available to us. We assume no liability resulting from above content. The technical standards are formulated and revised by customers’ requirement and us, if there are any changes, the latest specification will be executed and confirmed in the contract. |
Previous : Styrene-acrylic emulsion for interior and exterior walls F13-0201 Outstanding application and film-forming properties
Next : Primer lotion F13-0301 Super strong adhesion and interface compatibility
Copy product links
Long by picture save/share
INQUIRY
Add Successfully
At vero eos et accusamus et iusto elity agnissmos ducimus os quidtiis praesetium ptatum mole deeniti .
GET IN TOUCH
Address: M18-101, chemical zone, China south city, , shenzhen city, guangdong province, China.
Tell : (+86) 755-88834518
(Monday to Friday: 9:00-18:00)
Email : tanya@jitian168.com
Email : resin@jitian168.com
BUSINESS HOURS
Monday to Friday : 9 am to 6 pm
Saturday : 10 am to 4 pm
Sunday : Closed Support Hours in 24/7 Everyday
NEWS LETTER
Enter your email address for our mailing list to keep your self our lastest updated.
点击右上角
分享给朋友吧
© 2022 SHENZHEN JITIAN CHEMICAL CO.,LTD . All rights reserved Site Map
