Protective Film Emulsion (High-Adhesion Profiles and Sheets) F1510 High-viscosity emulsion with strong cohesive force High-Adhesion Masking Material Protection for Automotive Pre-Painting
Protective Film Emulsion (High-Adhesion Profiles and Panels) is specifically formulated for profiles and panels requiring high adhesion. Addressing the unique demands of high-adhesion profiles and panels during production, transportation, and use—including strong film adhesion, resistance to peeling, and tolerance to environmental interference—this product delivers an efficient and reliable surface protection solution through innovative formulation and process design.
I. Product Overview:
Protective Film Emulsion (High-Adhesion Profiles and Panels) is specifically formulated for profiles and panels requiring high adhesion. Addressing the unique demands of high-adhesion profiles and panels during production, transportation, and use—including strong film adhesion, resistance to peeling, and tolerance to environmental interference—this product delivers an efficient and reliable surface protection solution through innovative formulation and process design.
II. Product Specifications:
Appearance: Milky white uniform liquid
Solids Content: 54±1
Viscosity (mPas): 50-100
pH: 7.0-7.5
Curing Agent Addition Rate: 0.1%-0.5%
Specification
Application Areas | Specific Applications | Effect Description |
Construction Industry | Protection of high-adhesion PVC door and window profiles | During construction and transportation, prevents damage to the surfaces of profiles and panels while ensuring the protective film remains intact in complex environments, safeguarding material performance. |
Packaging Industry | Protection of high-adhesion insulation panels | Protect packaging materials from contamination and damage during storage and transportation, maintaining high adhesive performance to ensure effective packaging |
Automotive Manufacturing Industry | Temporary protection for curtain wall structural adhesive bonding surfaces | Safeguard high-adhesion component surfaces during automotive production, preventing damage from friction or impact to guarantee installation quality |
Electronics and Electrical Appliances Industry | Protection of high-adhesion tape substrates | Prevent surface damage to electronic materials during processing and assembly, ensuring stable product performance and enhancing production yield rates |
Product Features:
High-viscosity emulsion with strong cohesive force, high peel strength, and excellent unwinding performance.
V. Usage Instructions:
Substrate Preparation: Ensure surfaces of high-viscosity profiles and panels are clean, dry, and free of oil, dust, release agents, or other contaminants. For stubborn stains, wipe with a specialized cleaner, rinse with water, and allow to air dry thoroughly.
Emulsion Preparation: Adjust emulsion viscosity as needed using deionized water. Recommended dilution ratio: ≤8%. Stir thoroughly until uniform. For color matching, add appropriate amount of water-based color paste and mix until color is consistent.
Application Methods:
Spraying: Use an air compressor or airless sprayer. Maintain a 15–25 cm distance between the spray gun and the material surface. Adjust air pressure to 0.3–0.5 MPa. Apply 2-3 coats using uniform cross-hatch spraying, allowing 1-2 hours between coats (adjust based on ambient temperature and humidity). Ensure even coating distribution with a dry film thickness of 8-12μm.
Brush/Roller Application: Apply evenly with a high-quality brush or roller along the material's grain direction. Press firmly to ensure thorough coverage of the emulsion. Apply 2–3 coats with 1–2 hour intervals between coats.
Drying Conditions: After coating, profiles and panels may air-dry at room temperature or enter drying equipment. Set drying temperature to 50–70°C (122–158°F) for 3–6 hours to ensure complete film formation.
Environmental Requirements: Apply at temperatures ≥5°C (41°F) and relative humidity ≤85%. Avoid application during rain, high winds, or intense direct sunlight. During winter application, implement appropriate heating measures to maintain the required environmental temperature.
Film Removal Recommendations:
Remove the protective film at an appropriate time based on actual usage conditions.
When peeling the film, start slowly from the edges to prevent residue or surface damage caused by forceful tearing.
VI. Product Packaging:
50KG/drum
REMARK |
The above information is believed to be accurate and presents the best explanation currently available to us. We assume no liability resulting from above content. The technical standards are formulated and revised by customers’ requirement and us, if there are any changes, the latest specification will be executed and confirmed in the contract. |
Previous : Protective Film Emulsion (Rough Panel Surfaces) F1509 High initial adhesion low peel strength Landscape Architecture Industry
Next : Low VOC Standard R-9068 F2216 Strong adhesion Eco-friendly acrylic emulsion for printing
Copy product links
Long by picture save/share
Protective Film Emulsion (High-Adhesion Profiles and Sheets) F1510 High-viscosity emulsion with strong cohesive force High-Adhesion Masking Material Protection for Automotive Pre-Painting
INQUIRY
Add Successfully
At vero eos et accusamus et iusto elity agnissmos ducimus os quidtiis praesetium ptatum mole deeniti .
GET IN TOUCH
Address: M18-101, chemical zone, China south city, , shenzhen city, guangdong province, China.
Tell : (+86) 755-88834518
(Monday to Friday: 9:00-18:00)
Email : tanya@jitian168.com
Email : resin@jitian168.com
BUSINESS HOURS
Monday to Friday : 9 am to 6 pm
Saturday : 10 am to 4 pm
Sunday : Closed Support Hours in 24/7 Everyday
NEWS LETTER
Enter your email address for our mailing list to keep your self our lastest updated.
点击右上角
分享给朋友吧
© 2022 SHENZHEN JITIAN CHEMICAL CO.,LTD . All rights reserved Site Map
