Protective Film Emulsion (Rough Panel Surfaces) F1509 High initial adhesion low peel strength Landscape Architecture Industry
Protective Film Emulsion (Rough Panel Surfaces) is specifically formulated for rough panel surfaces. Such surfaces—including rough-cut wood, unpolished stone, and textured metal panels—feature uneven textures prone to scratches, abrasion, and stain penetration. This product addresses these challenges by providing a comprehensive, highly compatible protective solution for rough panel surfaces.
I. Product Overview:
Protective Film Emulsion (Rough Panel Surfaces) is specifically formulated for rough panel surfaces. Such surfaces—including rough-cut wood, unpolished stone, and textured metal panels—feature uneven textures prone to scratches, abrasion, and stain penetration. This product addresses these challenges by providing a comprehensive, highly compatible protective solution for rough panel surfaces.
II. Product Specifications:
Appearance: Milky white uniform liquid
Solids Content: 54±1%
Viscosity (mPas): 100-200
pH: 8-9
Curing Agent Addition Rate: 0.1%-0.8%
Specification
Application Fields | Specific Applications | Effect Description |
Architectural Decoration Industry | Surface protection for unpolished stone slabs (e.g., cultural stone, sandstone); protection for rough-finished wood panels (e.g., pressure-treated wood, natural wood boards); protection for textured metal panels (e.g., embossed steel sheets, antique copper plates) | Prevents scratches, abrasions, and contamination on panel surfaces during construction, preserving the material's original texture and enhancing the natural style and unique charm of architectural decoration. |
Furniture Manufacturing Industry | Protection for textured wood furniture panels (e.g., solid wood natural veneers); protection for industrial-style metal furniture panels | Protect raw materials and semi-finished products during furniture production, minimize surface damage, and maintain the rustic, unrefined design style and quality of furniture |
Landscape Architecture Industry | Protection for outdoor stone landscape panels (e.g., landscape stones, bench seat surfaces) and pressure-treated wood decking boards | Resist erosion from harsh outdoor environments, prevent weathering, fading, and stain adhesion on panels, and extend the service life of landscape facilities |
Crafts Processing Industry | Surface protection for hand-carved stone crafts and wooden crafts | Safeguard crafts from damage during processing, transportation, and display, preserving intricate details and artistic effects |
Product Features:
High-viscosity emulsion, high initial tack, low peel strength, subject to yellowing.
V. Application Method:
Substrate Preparation: Ensure rough panel surfaces are clean and free of oil, dust, loose particles, and other contaminants. For stubborn stains, use a wire brush with a specialized cleaner, then rinse thoroughly with water and allow to dry completely.
Emulsion Preparation: Adjust emulsion viscosity as needed using deionized water. Recommended dilution ratio: ≤5%. Stir thoroughly until uniform. For color matching, add appropriate amount of water-based color paste and mix until consistent.
Application Methods:
Brush Application: Using a stiff-bristle brush, firmly press and apply the emulsion onto the panel surface. Ensure thorough penetration and filling of pores, especially in depressions and deep textures. Apply 2-3 coats, allowing 2-3 hours between each coat.
Roller Application: Use a short-nap roller to apply evenly along the grain direction of the panel. Ensure thorough coverage by rolling repeatedly. Apply 2-3 coats, allowing 2-3 hours between coats.
Spray Application: Use a high-pressure airless sprayer, adjusting to appropriate pressure (15–20 MPa). Maintain a 20–30 cm distance between the spray gun and panel surface. Apply 2–3 coats at a uniform speed, allowing 2–3 hours between coats. Ensure even coating distribution, with dry film thickness controlled at 10–15 μm.
Drying Conditions: After coating with emulsion, panels may dry naturally at room temperature or enter drying equipment. Set drying temperature to 45–65°C (113–147°F) for 6–10 hours to ensure complete emulsion drying and film formation.
Environmental Requirements: Construction temperature ≥8°C (46°F), relative humidity ≤85%. Avoid application during rainy, windy, or high-temperature conditions with direct strong sunlight. During winter construction, employ heating measures such as erecting heated shelters or using heaters to maintain the required ambient temperature.
Film Removal Recommendation: Remove the protective film at an appropriate time based on actual usage. When peeling, start slowly from the edges of the panel to prevent residue or surface damage caused by tearing.
VI. Product Packaging:
50KG/drum
REMARK |
The above information is believed to be accurate and presents the best explanation currently available to us. We assume no liability resulting from above content. The technical standards are formulated and revised by customers’ requirement and us, if there are any changes, the latest specification will be executed and confirmed in the contract. |
Previous : SBR Asphalt Modifier (Water-Based) C1302 exceptional construction safety Road Construction Sector
Next : Protective Film Emulsion (High-Adhesion Profiles and Sheets) F1510 High-viscosity emulsion with strong cohesive force High-Adhesion Masking Material Protection for Automotive Pre-Painting
Copy product links
Long by picture save/share
Protective Film Emulsion (Rough Panel Surfaces) F1509 High initial adhesion low peel strength Landscape Architecture Industry
INQUIRY
Add Successfully
At vero eos et accusamus et iusto elity agnissmos ducimus os quidtiis praesetium ptatum mole deeniti .
GET IN TOUCH
Address: M18-101, chemical zone, China south city, , shenzhen city, guangdong province, China.
Tell : (+86) 755-88834518
(Monday to Friday: 9:00-18:00)
Email : tanya@jitian168.com
Email : resin@jitian168.com
BUSINESS HOURS
Monday to Friday : 9 am to 6 pm
Saturday : 10 am to 4 pm
Sunday : Closed Support Hours in 24/7 Everyday
NEWS LETTER
Enter your email address for our mailing list to keep your self our lastest updated.
点击右上角
分享给朋友吧
© 2022 SHENZHEN JITIAN CHEMICAL CO.,LTD . All rights reserved Site Map
