High-performance fluorocarbon emulsion F13-0801 bright and full paint good fluidity Super-durable decorative protective coating for roofs and various building materials
Yoshida High-Performance Fluorocarbon Emulsion is primarily composed of high-performance water-based fluorocarbon resin, offering excellent durability, ease of application, cleanability, and long-term light and colour retention.
Key indicators | Technical parameters | Test method |
Chemical type | Fluorinated acrylate copolymers | FT-IRSpectroscopy |
Appearance | Off-white liquid | visual estimation method |
Appearance | 45±1% | GB/T 1725-2007 |
Viscosity (3#/60rpm) | 200-1000 mPa·s | Brookfield RV |
pH value | 7-9 | ISO 976 |
Glass transition temperature（Tg) | 31℃ | Coating method by actual measurement |
MFFT | 22℃（Lowest film formation starting temperature） | ISO 2115 |
Fluorine content | ≥5% | XRFF luorescence spectroscopy |
- Parameters
Key indicators | Technical parameters | Test method |
Chemical type | Fluorinated acrylate copolymers | FT-IRSpectroscopy |
Appearance | Off-white liquid | visual estimation method |
Appearance | 45±1% | GB/T 1725-2007 |
Viscosity (3#/60rpm) | 200-1000 mPa·s | Brookfield RV |
pH value | 7-9 | ISO 976 |
Glass transition temperature（Tg) | 31℃ | Coating method by actual measurement |
MFFT | 22℃（Lowest film formation starting temperature） | ISO 2115 |
Fluorine content | ≥5% | XRFF luorescence spectroscopy |
Description
Yoshida High-Performance Fluorocarbon Emulsion is primarily composed of high-performance water-based fluorocarbon resin, offering excellent durability, ease of application, cleanability, and long-term light and colour retention.
Specification
Key indicators | Technical parameters | Test method |
Chemical type | Fluorinated acrylate copolymers | FT-IRSpectroscopy |
Appearance | Off-white liquid | visual estimation method |
Appearance | 45±1% | GB/T 1725-2007 |
Viscosity (3#/60rpm) | 200-1000 mPa·s | Brookfield RV |
pH value | 7-9 | ISO 976 |
Glass transition temperature（Tg) | 31℃ | Coating method by actual measurement |
MFFT | 22℃（Lowest film formation starting temperature） | ISO 2115 |
Fluorine content | ≥5% | XRFF luorescence spectroscopy |
Features
Better acid and alkali resistance, water resistance and anti-staining properties: alkali resistance, acid rain resistance; salt mist resistance, bright and full paint, good fluidity.
Application and How to use
1.Product application
Suitable for exterior walls of various buildings, natural stone paint topcoat, roofs, and various building materials, this ultra-durable decorative protective coating can significantly extend the service life of buildings.
2.How to use
Coating formulation recommendations: In fluorocarbon coating formulations, the recommended usage of this high-performance fluorocarbon emulsion is 40%–60% (subject to adjustment based on specific performance requirements, cost budgets, and other factors). When combined with weather-resistant pigments (such as ceramic pigments, metal oxide pigments), fillers (such as barium sulphate, kaolin), and auxiliary agents such as dispersants, levelling agents, and defoamers, high-performance fluorocarbon coatings can be formulated.
Substrate Preparation:
Metal substrates: Thoroughly remove surface oil, rust, and oxide scale. Use sandblasting or shot blasting to achieve a surface roughness of Sa2.5 grade (GB/T 8923.1 - 2011), and apply a配套 fluorocarbon primer for sealing.
Concrete substrates: Ensure the surface is flat, dry (moisture content <8%), clean, free of dust, grease, and loose particles. Fill holes and cracks with putty to achieve a smooth surface, then apply a配套 fluorocarbon sealing primer.
Application method:
Spray application: Use an air compressor or airless sprayer. Maintain a distance of 20–30 cm between the spray gun and the surface to be coated. Adjust the air pressure to 0.4–0.6 MPa. Apply 2–3 coats with even, cross-hatch spraying, allowing 2–4 hours between coats (adjust based on ambient temperature and humidity). Ensure the coating is uniform and consistent in thickness (recommended dry film thickness: 30–50 μm).
Brush/roller application: Use a high-quality brush or roller to apply the coating evenly in the same direction, avoiding back-and-forth brushing; edges, corners, and other areas can be pre-coated to ensure no missed areas, and apply 2–3 coats to achieve the desired coating effect.
Environmental requirements: Construction temperature ≥5°C, relative humidity ≤85%; avoid construction during rainy days, windy days, or under direct high-temperature sunlight; During winter construction, it is recommended to perform work during midday when temperatures are higher and to implement appropriate heating measures.
Coating System: To achieve optimal protective and decorative effects, it is recommended to use a coating system comprising ‘fluorocarbon primer + fluorocarbon intermediate coat + fluorocarbon topcoat.’ Each coat must be applied with appropriate intervals to ensure full drying and curing.
Package
50 kg/barrel
(note : the product’s packing can be customized according to requirements。)
Storage
In cool and dry place
REMARK |
The above information is believed to be accurate and presents the best explanation currently available to us. We assume no liability resulting from above content. The technical standards are formulated and revised by customers’ requirement and us, if there are any changes, the latest specification will be executed and confirmed in the contract. |
Previous : Fluorocarbon Emulsion F13-0802 Easy application and film-forming capability Protective coating for outdoor billboards
Next : Two-Component Fluorocarbon Emulsion 6:1 F13-0805 Superior Weather Resistance Metal Curtain Walls and Components
Copy product links
Long by picture save/share
High-performance fluorocarbon emulsion F13-0801 bright and full paint good fluidity Super-durable decorative protective coating for roofs and various building materials
INQUIRY
Add Successfully
At vero eos et accusamus et iusto elity agnissmos ducimus os quidtiis praesetium ptatum mole deeniti .
GET IN TOUCH
Address: M18-101, chemical zone, China south city, , shenzhen city, guangdong province, China.
Tell : (+86) 755-88834518
(Monday to Friday: 9:00-18:00)
Email : tanya@jitian168.com
Email : resin@jitian168.com
BUSINESS HOURS
Monday to Friday : 9 am to 6 pm
Saturday : 10 am to 4 pm
Sunday : Closed Support Hours in 24/7 Everyday
NEWS LETTER
Enter your email address for our mailing list to keep your self our lastest updated.
点击右上角
分享给朋友吧
© 2022 SHENZHEN JITIAN CHEMICAL CO.,LTD . All rights reserved Site Map
