958 is an excellent water-based rosin tackifying resin. It adopts advanced foreign emulsification technology and uses high-quality rosin ester as raw material. It has light color, high softening point, and excellent aging resistance. It is suitable for general-purpose pressure-sensitive adhesive systems and can obviously improve the adhesive performance of adhesive products.
Exterior | Slightly yellow or white emulsion |
PH value | 7-8 |
Viscosity mpa.s (25 ℃) | 100-400 |
Solid content% | 55 ± 2 |
Exterior | Slightly yellow or white emulsion |
PH value | 7-8 |
Viscosity mpa.s (25 ℃) | 100-400 |
Solid content% | 55 ± 2 |
Product introduction
958 is an excellent water-based rosin tackifying resin. It adopts advanced foreign emulsification technology and uses high-quality rosin ester as raw material. It has light color, high softening point, and excellent aging resistance. It is suitable for general-purpose pressure-sensitive adhesive systems and can obviously improve the adhesive performance of adhesive products.
Typical Properties:
1. Adopting unique anionic surface system, it has obvious tackifying effect, which can obviously improve the initial tack, peel strength and holding power of the adhesive.
2. It can obviously improve the adhesion performance of adhesive products to difficult surfaces such as large curvature and low surface energy.
3. Wide range of PH value, can be used in neutral or weak alkaline strips.
4. Fine particle size and good mechanical stability.
5, good compatibility, with acrylate, NR, EVA and other emulsions have good compatibility.
6, completely using water as a solvent, no VOC, environmental protection.
Key Attributes
Exterior | Slightly yellow or white emulsion |
PH value | 7-8 |
Viscosity mpa.s (25 ℃) | 100-400 |
Solid content% | 55 ± 2 |
Application/Uses
It is mainly used for water-based adhesives. It has good compatibility with a series of polymers, such as acrylic resins, natural rubber, and white latex. It also gives the finished products (labels, tapes, paper products, etc.) superior properties.
Usage and dosage
Add the rosin resin tackifier emulsion directly to the polymerization emulsion, adjust it to a suitable viscosity, and stir to sizing. The recommended dosage of this product is 10% to 30%.
Comments:
Properties reported here are typical of average lots. Jitian chemical makes no representation that the material in any particular shipment will confirm exactly to the values given.
Package:
Packed in plastic drums with a net weight of 200 kg.
Storage:
The shelf life is six months, avoiding sun, and sealed and stored in a cool and dry place at 5 ℃ -30 ℃.
REMARK |
Jitian Chemical shall not be responsible for the use of this information, or of any product, method, or apparatus mentioned, and you must make your own determination of its suitability and completeness for your own use, for the protection of the environment , and for the health and safety of your employees and purchasers of your products. No warranty is made of the merchantability of fitness of any product and nothing herein waves any of the seller's conditions of sale
|

Copy product links
Long by picture save/share

+86 15986601598
+86 15817282250
(+86) 755-88834518
Monday to Friday: 9:00-18:00