AB Adhesive H0601 Crystal resin offers excellent flexibility and scratch resistance
This product is a new generation of flat surface adhesive specifically developed for jewelry, imitation gemstones, signs, and nameplates.
The series includes flat hard adhesive, flat soft adhesive, curved hard adhesive, and curved soft adhesive. This variant is the flat hard adhesive.
Crystal drip glue not only provides excellent surface protection for craft items but also enhances surface gloss and brightness, further improving decorative effects.
Suitable for surface decoration and protecti
Shenzhen jitian Chemical Co., Ltd. - AB Adhesive | |||
Technical Parameters Before Mixing | |||
Component | Component A | Component | Component B |
Appearance Color | Clear liquid | Appearance Color | Clear liquid |
Viscosity (CPS) | 3500 | Viscosity (cP) | 50 |
Specific Gravity (cm³/g) | 1.05 | Specific Gravity (cm³/g) | 0.98 |
Technical Parameters After Mixing | |||
Mixing Ratio (Weight Ratio) | Component A: Component B = 3:1 | ||
Mixing Ratio (Volume Ratio) | Component A: Component B = 100:35-40 | ||
Color | Transparent liquid | ||
Viscosity After Mixing (CPS) | 1500-2000 | ||
Working Time | 40-80 (minutes) | ||
Initial set time | 20°C: 4-8 (hours) | ||
Curing time | 60°C: 1-3 (hours) | ||
Full cure | 25°C: 24 (hours) | ||
Technical parameters after 7 days curing at 25°C, 60% RH | |||
Hardness | 81 (SHORE D) | ||
Operating Temperature Range | -50-110 (°C) | ||
Compressive Strength | 20 kg/mm² | ||
Flexural Strength | 15 kg/mm² | ||
Water Absorption Rate | ＜0.01% at 25°C/24 hours | ||
The above data is for reference only; actual results may vary based on experimental conditions. | |||
- Parameters
Shenzhen jitian Chemical Co., Ltd. - AB Adhesive | |||
Technical Parameters Before Mixing | |||
Component | Component A | Component | Component B |
Appearance Color | Clear liquid | Appearance Color | Clear liquid |
Viscosity (CPS) | 3500 | Viscosity (cP) | 50 |
Specific Gravity (cm³/g) | 1.05 | Specific Gravity (cm³/g) | 0.98 |
Technical Parameters After Mixing | |||
Mixing Ratio (Weight Ratio) | Component A: Component B = 3:1 | ||
Mixing Ratio (Volume Ratio) | Component A: Component B = 100:35-40 | ||
Color | Transparent liquid | ||
Viscosity After Mixing (CPS) | 1500-2000 | ||
Working Time | 40-80 (minutes) | ||
Initial set time | 20°C: 4-8 (hours) | ||
Curing time | 60°C: 1-3 (hours) | ||
Full cure | 25°C: 24 (hours) | ||
Technical parameters after 7 days curing at 25°C, 60% RH | |||
Hardness | 81 (SHORE D) | ||
Operating Temperature Range | -50-110 (°C) | ||
Compressive Strength | 20 kg/mm² | ||
Flexural Strength | 15 kg/mm² | ||
Water Absorption Rate | ＜0.01% at 25°C/24 hours | ||
The above data is for reference only; actual results may vary based on experimental conditions. | |||
I. Product Overview:
This product is a new generation of flat surface adhesive specifically developed for jewelry, imitation gemstones, signs, and nameplates.
The series includes flat hard adhesive, flat soft adhesive, curved hard adhesive, and curved soft adhesive. This variant is the flat hard adhesive.
Crystal drip glue not only provides excellent surface protection for craft items but also enhances surface gloss and brightness, further improving decorative effects.
Suitable for surface decoration and protection of crafts made from metal, ceramic, glass, acrylic, and other materials.
Crystal drip glue offers outstanding flexibility, scratch resistance, low-temperature tolerance, yellowing resistance, high transparency, and ease of application. It also exhibits excellent adhesion to various substrates.
Specification
Shenzhen jitian Chemical Co., Ltd. - AB Adhesive | |||
Technical Parameters Before Mixing | |||
Component | Component A | Component | Component B |
Appearance Color | Clear liquid | Appearance Color | Clear liquid |
Viscosity (CPS) | 3500 | Viscosity (cP) | 50 |
Specific Gravity (cm³/g) | 1.05 | Specific Gravity (cm³/g) | 0.98 |
Technical Parameters After Mixing | |||
Mixing Ratio (Weight Ratio) | Component A: Component B = 3:1 | ||
Mixing Ratio (Volume Ratio) | Component A: Component B = 100:35-40 | ||
Color | Transparent liquid | ||
Viscosity After Mixing (CPS) | 1500-2000 | ||
Working Time | 40-80 (minutes) | ||
Initial set time | 20°C: 4-8 (hours) | ||
Curing time | 60°C: 1-3 (hours) | ||
Full cure | 25°C: 24 (hours) | ||
Technical parameters after 7 days curing at 25°C, 60% RH | |||
Hardness | 81 (SHORE D) | ||
Operating Temperature Range | -50-110 (°C) | ||
Compressive Strength | 20 kg/mm² | ||
Flexural Strength | 15 kg/mm² | ||
Water Absorption Rate | ＜0.01% at 25°C/24 hours | ||
The above data is for reference only; actual results may vary based on experimental conditions. | |||
Operating Procedure:
1. Cleaning: Before use, sand the surface of the object to be bonded smooth and ensure it is thoroughly clean.
2. Mixing: Maintain precise proportions. The mixing ratio for this product is 3:1 by weight, i.e., 30 grams of Component A to 10 grams of Component B. Stir thoroughly before use. For optimal results, vacuum degassing is recommended prior to application.
3. Application: Epoxy products cure effectively at room temperature. Accelerated curing occurs at 30-80°C (86-176°F). Higher temperatures increase curing speed and final strength.
4. Molding: After applying adhesive, secure bonded parts with clamps until fully cured before use.
Notes:
1. Product specifications and usage recommendations are based on our current understanding. As we cannot control customer application requirements or production processes, users must verify suitability. We recommend conducting small-scale trials first.
2. No returns or exchanges will be accepted during small-batch trial phases.
3. Based on customer test results, if samples are confirmed acceptable, all subsequent shipments will strictly adhere to the sample specifications.
4. Should customers have quality concerns upon receiving goods, please provide supporting evidence. (For returns or exchanges, do not add any items to the product package; otherwise, returns/exchanges will be declined.)
5. The above quotation is our company's reference price. Customers placing large orders may negotiate with our customer service representatives.
REMARK |
The above information is believed to be accurate and presents the best explanation currently available to us. We assume no liability resulting from above content. The technical standards are formulated and revised by customers’ requirement and us, if there are any changes, the latest specification will be executed and confirmed in the contract. |
Frequently Asked Questions:
Q1: How do I choose the right adhesive for my needs?
A: First, determine the product you'll be using the adhesive on and its intended function. Identify the required adhesive properties based on these factors, such as color, viscosity, open time, cure time, hardness, etc.
Q2: Mixing Ratio? Should adhesive be mixed by weight or volume?
A: Weight ratio. Adhesives are formulated based on weight ratios during design. Only weight ratios ensure optimal performance.
Q3: What is the adhesive's pot life (working time)?
A: Workable time refers to the duration at 25°C required for the viscosity of 100 grams of mixed adhesive to double. After this time, the adhesive isn't unusable—it's a testing standard. You can judge its workability by its flowability.
Q4: Bubbles?
A: Bubbles form during mixing. The amount of bubbles depends on the adhesive's viscosity—thinner adhesives produce fewer bubbles, while thicker ones produce more. For optimal results, vacuum degassing is recommended.
Q5: Not curing? Incomplete curing? For example: sometimes soft, sometimes hard?
A: This issue typically arises from insufficient or uneven mixing. Ensure thorough mixing, reaching all corners of the container during the mixing process.
Q6: Can the curing time be adjusted?
A: Curing occurs at room temperature (25°C). Curing time extends at higher temperatures. To accelerate curing, bake at 60°C for 3 hours to achieve basic cure. Remove the product from the oven and allow it to cool naturally.
Special Note: Adhesive curing speed is influenced by temperature and the amount of adhesive dispensed.
Higher temperatures increase heat release, accelerating curing; lower temperatures slow it down.
Larger adhesive volumes increase heat release, speeding up curing; smaller volumes slow it down.
Please control the amount mixed per batch, as accelerated reactions reduce the usable time.
Q7: Why does Adhesive A thicken in winter?
A: Low winter temperatures cause crystallization, which is normal. Simply place it in a 60°C oven to dissolve before use.
Q8: Why does the surface appear foggy? How to resolve?
A: Fogging typically results from moisture absorption due to high ambient humidity, common during rainy weather or winter. During such weather, maintain indoor dryness. Ensure relative humidity stays below 70% during application.
Q9: What are the operational safety precautions?
A: In rare cases, prolonged contact with adhesive may cause mild skin irritation with slight itching or discomfort. Wear protective gloves during use. If adhesive contacts skin, wipe off with acetone or alcohol, then thoroughly clean with detergent.
Copy product links
Long by picture save/share
INQUIRY
Add Successfully
At vero eos et accusamus et iusto elity agnissmos ducimus os quidtiis praesetium ptatum mole deeniti .
GET IN TOUCH
Address: M18-101, chemical zone, China south city, , shenzhen city, guangdong province, China.
Tell : (+86) 755-88834518
(Monday to Friday: 9:00-18:00)
Email : tanya@jitian168.com
Email : resin@jitian168.com
BUSINESS HOURS
Monday to Friday : 9 am to 6 pm
Saturday : 10 am to 4 pm
Sunday : Closed Support Hours in 24/7 Everyday
NEWS LETTER
Enter your email address for our mailing list to keep your self our lastest updated.
点击右上角
分享给朋友吧
© 2022 SHENZHEN JITIAN CHEMICAL CO.,LTD . All rights reserved Site Map
