Soft Gel for Phone Cases H0627 Low viscosity Excellent flow properties Superior defoaming performance
Suitable for surface coating and drip coating on various products including self-adhesive labels, stickers, trademarks, EVA/PVC panels, hang tags, badges, and crafts. Also applicable for surface drip coating on other products such as marble, crafts, ceramics, hardware, plastics, electronics, and wood. Additionally used for soft gel encapsulation on other product surfaces.
Shenzhen jitian Chemical Co., Ltd. - Soft Rubber for Mobile Phone Cases | ||
Name | Mobile Phone Case Silicone Coating (Soft Rubber) | |
Packaging | 4KG/Set 20KG/Box | |
Model | H0627-A | H0627-B |
Color | Colorless transparent liquid | Colorless transparent liquid |
Mix Ratio | 3：1 | |
Viscosity CPS | 1700 | 160 |
Hardness | 50-60 SHORED | |
Shelf Life | Store separately for 12 months. | |
Working Time | At room temperature (25°C), the working time for 100 grams is 30-45 minutes. | |
Curing Time | At room temperature (25°C), the mixed 100 grams of grinding paste will cure within 8-12 hours. | |
Note: The above data is provided for reference only. Actual results may vary and should be based on individual experimental data. | ||
- Parameters
Shenzhen jitian Chemical Co., Ltd. - Soft Rubber for Mobile Phone Cases | ||
Name | Mobile Phone Case Silicone Coating (Soft Rubber) | |
Packaging | 4KG/Set 20KG/Box | |
Model | H0627-A | H0627-B |
Color | Colorless transparent liquid | Colorless transparent liquid |
Mix Ratio | 3：1 | |
Viscosity CPS | 1700 | 160 |
Hardness | 50-60 SHORED | |
Shelf Life | Store separately for 12 months. | |
Working Time | At room temperature (25°C), the working time for 100 grams is 30-45 minutes. | |
Curing Time | At room temperature (25°C), the mixed 100 grams of grinding paste will cure within 8-12 hours. | |
Note: The above data is provided for reference only. Actual results may vary and should be based on individual experimental data. | ||
I. Product Application:
Suitable for surface coating and drip coating on various products including self-adhesive labels, stickers, trademarks, EVA/PVC panels, hang tags, badges, and crafts. Also applicable for surface drip coating on other products such as marble, crafts, ceramics, hardware, plastics, electronics, and wood. Additionally used for soft gel encapsulation on other product surfaces.
II. Product Advantages:
1. Ultra-soft epoxy resin crystal drip coating with low viscosity, excellent flow properties, and superior defoaming performance;
2. Cures at room or moderate temperatures with moderate curing speed;
3. Cured material exhibits excellent flexibility, high transparency, smooth and glossy surface, bubble-free finish, and strong adhesion;
4. Cured material exhibits excellent solvent resistance, toughness, and yellowing resistance;
5. Can be customized during use by adding transparent color pastes, opaque color pastes, fluorescent color pastes, pearlescent color pastes, phosphorescent powders, glitter powders, etc., according to specific process requirements.
Specification
Shenzhen jitian Chemical Co., Ltd. - Soft Rubber for Mobile Phone Cases | ||
Name | Mobile Phone Case Silicone Coating (Soft Rubber) | |
Packaging | 4KG/Set 20KG/Box | |
Model | H0627-A | H0627-B |
Color | Colorless transparent liquid | Colorless transparent liquid |
Mix Ratio | 3：1 | |
Viscosity CPS | 1700 | 160 |
Hardness | 50-60 SHORED | |
Shelf Life | Store separately for 12 months. | |
Working Time | At room temperature (25°C), the working time for 100 grams is 30-45 minutes. | |
Curing Time | At room temperature (25°C), the mixed 100 grams of grinding paste will cure within 8-12 hours. | |
Note: The above data is provided for reference only. Actual results may vary and should be based on individual experimental data. | ||
Operating Procedure:
1. Cleaning: Before use, sand the surface of the object to be bonded smooth and ensure it is thoroughly clean.
2. Mixing: Maintain precise proportions. The mixing ratio for this product is 3:1 by weight, i.e., 30 grams of Component A to 10 grams of Component B. Stir thoroughly before use. For optimal results, vacuum degassing is recommended prior to application.
3. Application: Epoxy products cure effectively at room temperature. Accelerated curing occurs at 30-80°C (86-176°F). Higher temperatures increase curing speed and final strength.
4. Molding: After applying adhesive, secure bonded components with clamps until fully cured before use.
REMARK |
The above information is believed to be accurate and presents the best explanation currently available to us. We assume no liability resulting from above content. The technical standards are formulated and revised by customers’ requirement and us, if there are any changes, the latest specification will be executed and confirmed in the contract. |
Previous : Label Drip Coating H0626 Suitable for surface coating excellent flow properties
Next : Mosaic Wall Decal Adhesive H0628 Curvature degree adjustable Surface soft encapsulation for other products
Copy product links
Long by picture save/share
Soft Gel for Phone Cases H0627 Low viscosity Excellent flow properties Superior defoaming performance
INQUIRY
Add Successfully
At vero eos et accusamus et iusto elity agnissmos ducimus os quidtiis praesetium ptatum mole deeniti .
GET IN TOUCH
Address: M18-101, chemical zone, China south city, , shenzhen city, guangdong province, China.
Tell : (+86) 755-88834518
(Monday to Friday: 9:00-18:00)
Email : tanya@jitian168.com
Email : resin@jitian168.com
BUSINESS HOURS
Monday to Friday : 9 am to 6 pm
Saturday : 10 am to 4 pm
Sunday : Closed Support Hours in 24/7 Everyday
NEWS LETTER
Enter your email address for our mailing list to keep your self our lastest updated.
点击右上角
分享给朋友吧
© 2022 SHENZHEN JITIAN CHEMICAL CO.,LTD . All rights reserved Site Map
