SBR latex SBR F0605 High-speed packaging adhesive Waterproof building materials Cigarette packaging
SBR latex SBR emulsion has very good elongation, water resistance and fluidity. It has the fastest drying speed in the product line. Due to this characteristic and low product viscosity, it is very suitable for applications on high-speed packaging machines.
Typical Properties:
Technical Parameters | Value |
Solid content: | > 54.5% |
Viscosity kinetics at 25 ° C | 1300-2000mPa.s |
PH value (500g / l H20): | 5-7 |
General characteristics | Value |
Density at 20 ℃ | Approximately 1,07 g / cm3 |
Minimum film forming temperature | 0 ℃ |
Frost resistance | Avoid freezing |
Main particle size | About 1μm |
Protective colloid / emulsifier system | Polyvinyl alcohol |
Compatibility with pigments and fillers | it is good |
Exterior | Transparent and shiny |
Film-forming surface | Slightly dry tack |
Tensile Strength | 4.0N / mm2 |
Elongation at break | About 600% |
Glass transition temperature | About -2-2 ℃ |
- Parameters
Typical Properties:
Technical Parameters | Value |
Solid content: | > 54.5% |
Viscosity kinetics at 25 ° C | 1300-2000mPa.s |
PH value (500g / l H20): | 5-7 |
General characteristics | Value |
Density at 20 ℃ | Approximately 1,07 g / cm3 |
Minimum film forming temperature | 0 ℃ |
Frost resistance | Avoid freezing |
Main particle size | About 1μm |
Protective colloid / emulsifier system | Polyvinyl alcohol |
Compatibility with pigments and fillers | it is good |
Exterior | Transparent and shiny |
Film-forming surface | Slightly dry tack |
Tensile Strength | 4.0N / mm2 |
Elongation at break | About 600% |
Glass transition temperature | About -2-2 ℃ |
SBR latex SBR
Code: F0605
Product Describe
SBR latex SBR emulsion has very good elongation, water resistance and fluidity. It has the fastest drying speed in the product line. Due to this characteristic and low product viscosity, it is very suitable for applications on high-speed packaging machines.
Typical Properties:
Technical Parameters | Value |
Solid content: | > 54.5% |
Viscosity kinetics at 25 ° C | 1300-2000mPa.s |
PH value (500g / l H20): | 5-7 |
General characteristics | Value |
Density at 20 ℃ | Approximately 1,07 g / cm3 |
Minimum film forming temperature | 0 ℃ |
Frost resistance | Avoid freezing |
Main particle size | About 1μm |
Protective colloid / emulsifier system | Polyvinyl alcohol |
Compatibility with pigments and fillers | it is good |
Exterior | Transparent and shiny |
Film-forming surface | Slightly dry tack |
Tensile Strength | 4.0N / mm2 |
Elongation at break | About 600% |
Glass transition temperature | About -2-2 ℃ |
Key Attributes
It is compatible with fully hydrolyzed and partially hydrolyzed polyvinyl alcohol, and can be mixed with various resins, solvents, plasticizers, and other modifiers, and can be mixed with other aqueous emulsions.
Due to its fast drying speed and flexibility, it can be used in a variety of packaging adhesives without requiring much formulation. Compared to other emulsions, it is more suitable for bonding soft surfaces, such as leather and textiles.
Application/Uses
1.High-speed packaging adhesive
2. Water-resistant packaging adhesive
3. Leather and fabric, and foam sponge and fabric
4.Waterproof building materials
5. Cigarette packaging
6. Specially used for polishing and bonding of optical glass lens.
Comments
Properties reported here are typical of average lots. Jitian chemical makes no representation that the material in any particular shipment will confirm exactly to the values given.
Packaging :50KG / barrel.
Storage:
The product should be stored indoors in a closed container to avoid freezing and storage under high temperature. The normal storage temperature is recommended to be 10 ℃ -35 ℃. Effective storage time is one year.
Previous : SBR Latex 106 F0603 Bitumen modification of thin slurry sealing and adhesive oil Modification of waterproofing engineering materials
Next : Waterborne epoxy resin E0430 Coatings adhesives anticorrosion electrical insulation laminates castings
Copy product links
Long by picture save/share
INQUIRY
Add Successfully
At vero eos et accusamus et iusto elity agnissmos ducimus os quidtiis praesetium ptatum mole deeniti .
GET IN TOUCH
Address: M18-101, chemical zone, China south city, , shenzhen city, guangdong province, China.
Tell : (+86) 755-88834518
(Monday to Friday: 9:00-18:00)
Email : tanya@jitian168.com
Email : resin@jitian168.com
BUSINESS HOURS
Monday to Friday : 9 am to 6 pm
Saturday : 10 am to 4 pm
Sunday : Closed Support Hours in 24/7 Everyday
NEWS LETTER
Enter your email address for our mailing list to keep your self our lastest updated.
点击右上角
分享给朋友吧
© 2022 SHENZHEN JITIAN CHEMICAL CO.,LTD . All rights reserved Site Map
