Protective Film Emulsion (PE Film PE Film) F1501 excellent composite strength Surface protection for home appliance packaging
This protective film emulsion is specifically developed for PE (polyethylene) protective film production. Through a specialized formulation and process, it significantly enhances the overall performance of PE films, meeting high-quality demands for protective films across packaging, electronics, construction materials, and other industries.
Appearance: Milky white uniform liquid
Solid Content: 39±1
Viscosity (mPas): 20-150
pH: 7.5-8.5
- Parameters
Appearance: Milky white uniform liquid
Solid Content: 39±1
Viscosity (mPas): 20-150
pH: 7.5-8.5
I. Product Overview:
This protective film emulsion is specifically developed for PE (polyethylene) protective film production. Through a specialized formulation and process, it significantly enhances the overall performance of PE films, meeting high-quality demands for protective films across packaging, electronics, construction materials, and other industries.
II. Product Specifications:
Appearance: Milky white uniform liquid
Solid Content: 39±1
Viscosity (mPas): 20-150
pH: 7.5-8.5
Product Features:
High transparency, no solvent volatilization, excellent composite strength, and minimal delamination.
V. Application Method:
Emulsion Dilution: Depending on specific coating processes and desired film thickness, deionized water may be used to dilute the emulsion. The recommended dilution ratio should not exceed 10% (thorough mixing required).
Coating Process:
Roller Coating: Apply the emulsion evenly onto the PE film surface using a coating roller. Maintain a roller speed of 10–30 m/min to ensure uniform coating thickness. Recommended dry film thickness: 5–15 μm.
Coating: Apply the emulsion evenly onto the moving PE film using a coating machine. Adjust the distance between the coating head and the PE film, along with the emulsion flow rate, to control the coating thickness. Similarly, a recommended dry film thickness of 5–15μm is advised.
Drying Conditions: After coating, the PE film enters the drying equipment. Set the drying temperature to 60–80°C with a drying time of 5–10 minutes to ensure complete drying and film formation of the emulsion.
Laminating Process: Apply the coated and dried PE protective film to the surface of the protected object using either cold or hot lamination. Apply pressure at 0.1–0.3 MPa to ensure tight adhesion.
Environmental Requirements:
Operate within ambient temperatures of 5–35°C (41–95°F) and relative humidity ≤80%. Avoid production in humid or dusty environments to prevent contaminants from compromising film quality.
Application
Application Areas | Specific Applications | Effect Description |
Electronics Industry | Surface protection for mobile phone screens, tablet screens, LCD monitors, optical lenses, etc. | Prevents screens and lenses from being scratched, marred, or contaminated with fingerprints and dust during production, transportation, and storage, maintaining surface smoothness and clarity. |
Construction and Building Materials Industry | Surface protection for glass curtain walls, door/window glass, stainless steel sheets, aluminum alloy profiles, stone panels | Avoids scratches and stains during processing, installation, and handling, preserving the aesthetic appeal and quality of material surfaces. |
Automotive Industry | Surface protection for automotive paintwork, dashboards, interior trim components | Protects new vehicles from paint damage and interior component scratches during transportation and sales, maintaining the pristine appearance of both exterior and interior components. |
Packaging Industry | Surface protection for home appliance packaging, furniture surfaces, plastic product packaging | Protect product surfaces from abrasion and contamination during packaging and transportation, enhancing delivery quality. |
VI. Product Packaging:
50 kg per drum
REMARK |
The above information is believed to be accurate and presents the best explanation currently available to us. We assume no liability resulting from above content. The technical standards are formulated and revised by customers’ requirement and us, if there are any changes, the latest specification will be executed and confirmed in the contract. |
Model | Product Name | Appearance | Product Performance | Product Application |
F1501 | Protective Film Emulsion (PE Film) | Milky white uniform liquid | High transparency, solvent-free, excellent composite strength, resistant to delamination | Suitable for laminating PE film to PE film |
F1502 | Protective Film Emulsion (Frosted Profiles) | Milky white uniform liquid | High-viscosity emulsion, superior water resistance, high peel strength, excellent roll-forming performance | Suitable for protecting frosted profiles and carpets. |
F1503 | Protective Film Emulsion (Plastic Steel Profiles) | Milky white uniform liquid | Low-viscosity emulsion, high initial tack, low peel strength, excellent conformability, minimal aging changes on laminated boards | Suitable for PVC profiles and injection-molded parts |
F1504 | Protective Film Emulsion (Home Appliance PCM Side Panels) | Milky white uniform liquid | Medium-to-high viscosity emulsion, high transparency, resistant to yellowing, suitable for simple stamping molding | PCM side panels for home appliances |
F1505 | Protective Film Emulsion (Standard Profiles and Sheets) | Milky white uniform liquid | Medium-viscosity emulsion: Moderate initial tack and peel strength, excellent conformability | Suitable for protecting standard profiles and panels |
F1506 | Protective Film Emulsion (Fine Frosted Profiles and Sheets) | Milky white uniform liquid | Medium-high viscosity emulsion: Higher initial tack and peel strength | Suitable for protecting fine-textured profiles and panels |
F1507 | Protective Film Emulsion (Universal) | Milky white uniform liquid | Medium-viscosity emulsion: Moderate peel strength and initial tack, strong cohesive strength | Suitable for protecting standard aluminum profiles, stainless steel sheets, aluminum composite panels, aluminum veneer panels, security doors, ceramics, etc. |
F1508 | Protective Film Emulsion (Glossy Materials) | Milky white uniform liquid | Low-viscosity emulsion: Low initial tack, strong cohesion, significant tack enhancement | Low-adhesion, for glossy materials |
F1509 | Protective Film Emulsion (Rough Panel Sheets) | Milky white uniform liquid | High-viscosity emulsion: High initial tack, low peel strength, prone to yellowing | Suitable for protecting rough-textured panels |
F1510 | Protective Film Emulsion (High-Adhesion Profiles and Sheets) | Milky white uniform liquid | High-viscosity emulsion: Strong cohesion, high peel strength, excellent unwinding performance | Suitable for protecting high-adhesion profiles, panels, and carpets |
Previous : Two-Component Fluorocarbon Emulsion 6:1 F13-0805 Superior Weather Resistance Metal Curtain Walls and Components
Next : Protective Film Emulsion (PE Film) F1501 High transparency Home appliance packaging furniture surface packaging plastic product packaging
Copy product links
Long by picture save/share
Protective Film Emulsion (PE Film PE Film) F1501 excellent composite strength Surface protection for home appliance packaging
INQUIRY
Add Successfully
At vero eos et accusamus et iusto elity agnissmos ducimus os quidtiis praesetium ptatum mole deeniti .
GET IN TOUCH
Address: M18-101, chemical zone, China south city, , shenzhen city, guangdong province, China.
Tell : (+86) 755-88834518
(Monday to Friday: 9:00-18:00)
Email : tanya@jitian168.com
Email : resin@jitian168.com
BUSINESS HOURS
Monday to Friday : 9 am to 6 pm
Saturday : 10 am to 4 pm
Sunday : Closed Support Hours in 24/7 Everyday
NEWS LETTER
Enter your email address for our mailing list to keep your self our lastest updated.
点击右上角
分享给朋友吧
© 2022 SHENZHEN JITIAN CHEMICAL CO.,LTD . All rights reserved Site Map
