Primer lotion F13-0301 Primer for interior and exterior walls of buildings Wood sealing primer Anti corrosion and anti rust primer
The primer lotion is specially developed to improve the basic performance of the coating system. As a key connecting layer between the coating and the substrate, it can significantly enhance the adhesion, provide basic protection and optimize the subsequent coating construction effect. It is applicable to many fields such as architecture, industry, home decoration, etc.
Product specifications:
project | Parameter values | Testing standards |
appearance | Milky white liquid | Visual inspection method |
Solid Content | 40±5% | GB/T 1725-2007 |
Viscosity (3 # rotor/60rpm) | 100-2000 mPa·s | Brookfield RV |
ph value | 7-9.5 | ISO 976 |
MFFT | 5-30 | ISO 2115 |
Glass transition temperature (Tg) | 10-40 | Actual film formation method |
- Parameters
Product specifications:
project | Parameter values | Testing standards |
appearance | Milky white liquid | Visual inspection method |
Solid Content | 40±5% | GB/T 1725-2007 |
Viscosity (3 # rotor/60rpm) | 100-2000 mPa·s | Brookfield RV |
ph value | 7-9.5 | ISO 976 |
MFFT | 5-30 | ISO 2115 |
Glass transition temperature (Tg) | 10-40 | Actual film formation method |
Primer lotion
Code:F13-0301
Product Introduction:
The primer lotion is specially developed to improve the basic performance of the coating system. As a key connecting layer between the coating and the substrate, it can significantly enhance the adhesion, provide basic protection and optimize the subsequent coating construction effect. It is applicable to many fields such as architecture, industry, home decoration, etc.
Product specifications:
project | Parameter values | Testing standards |
appearance | Milky white liquid | Visual inspection method |
Solid Content | 40±5% | GB/T 1725-2007 |
Viscosity (3 # rotor/60rpm) | 100-2000 mPa·s | Brookfield RV |
ph value | 7-9.5 | ISO 976 |
MFFT | 5-30 | ISO 2115 |
Glass transition temperature (Tg) | 10-40 | Actual film formation method |
Product Features:
1. Super strong adhesion and interface compatibility;
2. Excellent basic protection performance;
3. Good construction and film-forming performance;
4. Excellent system compatibility;
5. Green and environmentally friendly quality
Product Usage:
industry | Specific applications | Effect Description |
construction industry | Exterior wall primer, interior wall moisture-proof primer, basement anti-corrosion primer, exterior wall insulation system interface primer | Enhance the adhesion between walls and coatings, provide waterproof, moisture-proof, and anti-corrosion protection, and extend the service life of buildings |
Industrial sector | Steel structure anti rust primer, mechanical equipment anti-corrosion primer, pipeline anti-corrosion primer | Effectively prevent corrosion of metal substrates, improve the durability of industrial equipment and facilities, and reduce maintenance costs |
Home decoration field | Wood furniture sealing primer, wall alkali resistant primer, kitchen and bathroom waterproof primer | Seal the surface of the wood to prevent moisture infiltration and wood deformation; Neutralize alkaline substances on the wall surface to prevent coating from alkali and yellowing; Meet the waterproof requirements of kitchen and bathroom |
usage method:
Metal substrate: Remove surface oil stains, rust, and oxide scale. It is recommended to use sandblasting or grinding treatment to achieve a surface roughness of Sa2.5 level (GB/T 8923.1-2011).
Concrete/cement mortar substrate: Ensure a smooth and dry surface (moisture content<10%), free of dust, oil stains, loose particles, and repair holes and cracks with putty to make them smooth.
Wood substrate: Polish smooth, remove impurities such as sawdust and resin. If the wood contains high oil content, degreasing treatment should be carried out first.
Construction method:
Spraying: Use an air compressor or airless sprayer, maintain a distance of 20-30cm between the spray gun and the substrate surface, control the air pressure at 0.3-0.5MPa, and spray 1-2 times at a constant speed to ensure uniform coating coverage.
Brush coating/roller coating: Use a brush or roller to evenly apply in the same direction, avoiding missed coating and sagging. Pre coating can be applied to corners, gaps, and other areas.
Recommended dosage: The theoretical coating amount is 0.1-0.15kg/m2 (the specific dosage varies depending on the roughness of the substrate and the construction method).
Matching suggestions: select appropriate primer lotion products according to the type of subsequent finish and use scenario, and strictly follow the matching system of primer intermediate finish to achieve the best effect.
Environmental requirements: Construction temperature ≥ 3 ℃, relative humidity ≤ 85%; Avoid construction on rainy, windy, or direct sunlight days.
Package
50KG/barrel
(note : the product’s packing can be customized according to requirements。)
Storage
In cool and dry place
Primer lotion
Product Name | Applicable Fields | MFFT(℃) | Tg(℃) | Solid content% | viscosity (mpa. s) | pH value | VOC | characteristics |
F13-0301A | Tear resistant primer | 29 | 38 | 45±1 | 100-1000（2#60） | 7.0-9.0 | L | Excellent adhesion, permeability, and high tear resistance; Excellent resistance to pan salt alkalinity; |
F13-0301B | High performance alkali resistant primer lotion | 27 | 34 | 46±1 | 500-2000（3#60） | 7.0-9.5 | L | It has good water resistance, alkali resistance, and frost resistance in the formula of the sealing primer coating; Excellent tear resistance performance; |
F13-0301C | Flugger Sealer | 5 | 12 | 30±1 | <100（2#60） | 7.0-9.0 | L | Excellent penetration hardening and film-forming properties; Good alkali resistance and alkali salt precipitation resistance; Containing epoxy groups, the coating has strong sealing properties and excellent adhesion; |
Previous : Solid mortar emulsion F12-1001 concrete interfacial agent transparent waterproofing solid sand treasure floor paint and silicate coatings
Next : elastic emulsion F13-0401 Basement moisture-proof elastic putty Facing layer of external wall insulation system Anti-corrosion elastic coating for steel structure Anti-cracking protective coating for pipeline
Copy product links
Long by picture save/share
Primer lotion F13-0301 Primer for interior and exterior walls of buildings Wood sealing primer Anti corrosion and anti rust primer
INQUIRY
Add Successfully
At vero eos et accusamus et iusto elity agnissmos ducimus os quidtiis praesetium ptatum mole deeniti .
GET IN TOUCH
Address: M18-101, chemical zone, China south city, , shenzhen city, guangdong province, China.
Tell : (+86) 755-88834518
(Monday to Friday: 9:00-18:00)
Email : tanya@jitian168.com
Email : resin@jitian168.com
BUSINESS HOURS
Monday to Friday : 9 am to 6 pm
Saturday : 10 am to 4 pm
Sunday : Closed Support Hours in 24/7 Everyday
NEWS LETTER
Enter your email address for our mailing list to keep your self our lastest updated.
点击右上角
分享给朋友吧
© 2022 SHENZHEN JITIAN CHEMICAL CO.,LTD . All rights reserved Site Map
