The preservatives sold by our company are widely used in water treatment, coatings, polymer synthetic emulsions and other aqueous systems. Their active ingredients are 5-chloromethylisothiazolin-3-one (CIT), 2-methyl- 4 isothiazolin-3-one (MIT)
Exterior Light green transparent liquid
Active ingredient content (%) ≥1.5
Chlorine ratio 2.5-4.0
Density (g / ml, 20 ℃) ≥1.02
PH value 2.0-5.0
stability PH value 2.0-9.0 stable
Exterior Light green transparent liquid
Active ingredient content (%) ≥1.5
Chlorine ratio 2.5-4.0
Density (g / ml, 20 ℃) ≥1.02
PH value 2.0-5.0
stability PH value 2.0-9.0 stable
Product Describe
The preservatives sold by our company are widely used in water treatment, coatings, polymer synthetic emulsions and other aqueous systems. Their active ingredients are 5-chloromethylisothiazolin-3-one (CIT), 2-methyl- 4 isothiazolin-3-one (MIT)
Typical Properties
Exterior Light green transparent liquid
Active ingredient content (%) ≥1.5
Chlorine ratio 2.5-4.0
Density (g / ml, 20 ℃) ≥1.02
PH value 2.0-5.0
stability PH value 2.0-9.0 stable
Key Attributes
1. Broad-spectrum, long-lasting kill a variety of bacteria, fungi and yeast, with low dosage. 2. A wide range of applicable PH values, both 2-9 can be used. 3. Miscible with water, can be added in any process, easy to operate. 4 Low toxicity It is completely harmless to use concentrated test. 5. No discharge residue, which will not cause cumulative pollution to the environment. 6, non-burning, easy to transport, easy to use. 7. Good compatibility with various emulsifiers, surfactants and protein ingredients. 8. It has special effects on Pseudomonas aeruginosa and has been recognized by the world. 9. Free of formaldehyde and VOC.
Application/Uses
It is widely used in coatings, adhesives, inks, dyes, metal cutting fluids, water-based polymers, and paraffin liquids. Can also be used for water treatment. Such as petrochemical, metallurgy, electricity, central air-conditioning, industrial circulating cooling water sterilization, bathing, and effectively inhibit the reproduction and growth of micro-ecological characteristics.
Usage and dosage
The amount used in paints, coatings, and adhesives is 0.05-0.4%. When used in water treatment, depending on the growth of the bacteria bath during killing, 1-2 times per week. The dosage is 50-100ppm. .
Precautions:
1. This product should avoid direct contact with eyes. Once in contact, rinse immediately with plenty of water without delay or contact with the skin for a long time.
2. Do not contact with reducing metals during storage of this product, such as iron and aluminum, as it may cause product decomposition.
3. This product has poor stability in alkaline media with a pH value greater than 9.0. It should not be used and cannot be used with strong nucleophilic chemicals.
Comments
Properties reported here are typical of average lots. Jitian chemical makes no representation that the material in any particular shipment will confirm exactly to the values given.
Packaging and storage
25kg closed plastic drum. Shelf life is one year under dark and long temperature.

Copy product links
Long by picture save/share

+86 15986601598
+86 15817282250
(+86) 755-88834518
Monday to Friday: 9:00-18:00