H0231-11 Hot Melt Adhesive - White Glue Stick 120°C 11.300mm Features fast curing low pollution and strong adhesion Plastic Fabric
Main ingredients: basic resin, tackifier, viscosity modifier and antioxidant.
Operating temperature: 150 ℃ -180 ℃
Softening point: 120 degrees or less
Curing time: 8-15 seconds
Color: white and transparent
Toxicity: non-toxic
Specification: 11 * 300mm
- Parameters
Operating temperature: 150 ℃ -180 ℃
Softening point: 120 degrees or less
Curing time: 8-15 seconds
Color: white and transparent
Toxicity: non-toxic
Specification: 11 * 300mm
Product Describe
Main ingredients: basic resin, tackifier, viscosity modifier and antioxidant.
Product index:
Operating temperature: 150 ℃ -180 ℃
Softening point: 120 degrees or less
Curing time: 8-15 seconds
Color: white and transparent
Toxicity: non-toxic
Specification: 11 * 300mm
Features
1. It is usually solid at room temperature, and melts into a liquid when heated to a certain degree. Once it cools below the melting point, it quickly becomes a solid (that is, it solidifies);
2. It has fast curing, low pollution, strong adhesion, and the adhesive layer has certain flexibility, hardness, and certain toughness;
3. The adhesive liquid is applied to the adhesive layer after being cooled and solidified on the adherend, and can also be heated and melted again to become an adhesive body and then adhered to the adherend, which has a certain re-adhesion.
4. In use, as long as the hot melt adhesive is heated and melted into the desired liquid state, and applied to the adhered object, after bonding, the bonding and solidification can be completed within a few seconds. The softening point of the hot melt adhesive should generally be 80 Above ℃, that is, when heated to 80 ℃, the colloid should start to soften and dissolve. This temperature is only the temperature at which the hot melt adhesive melts. To make it melt to the extent that it can be used, the heating temperature must also rise to 130-180 ° C. At this temperature, the viscosity, fluid, viscosity, etc. of the colloid are suitable for bonding. It can reach the degree of hardening, cooling and drying. After melting, it is light brown translucent or white.
Instructions for use
Environmentally friendly hot melt adhesive pellets, electronic and electrical industry, jewelry, handicrafts, toys, electronic products, plastics, fabrics, metal products, etc.
Product packaging
25KG / carton
Comments
Properties reported here are typical of average lots. Jitian chemical makes no representation that the material in any particular shipment will confirm exactly to the values given.
Precautions
When working near the melter, wear work clothes and protective glasses; stop production for more than 2 hours, adjust the temperature of the melt to below 120 ° C, or turn off the heating equipment; regularly clean the heating equipment to maintain the accuracy of the temperature controller.
REMARK |
Jitian Chemical shall not be responsible for the use of this information, or of any product, method, or apparatus mentioned, and you must make your own determination of its suitability and completeness for your own use, for the protection of the environment , and for the health and safety of your employees and purchasers of your products. No warranty is made of the merchantability of fitness of any product and nothing herein waves any of the seller's conditions of sale. |
Previous : H0231-7 Hot Melt Adhesive - White Glue Stick 120°C 7.300mm Possesses a certain degree of re-adhesiveness Handicrafts Electronic products
Next : H0232-11 Hot Melt Adhesive - White Glue Stick 130°C 11.300mm Strong adhesive strength Electronics and Electrical Appliances Industry
Copy product links
Long by picture save/share
H0231-11 Hot Melt Adhesive - White Glue Stick 120°C 11.300mm Features fast curing low pollution and strong adhesion Plastic Fabric
INQUIRY
Add Successfully
At vero eos et accusamus et iusto elity agnissmos ducimus os quidtiis praesetium ptatum mole deeniti .
GET IN TOUCH
Address: M18-101, chemical zone, China south city, , shenzhen city, guangdong province, China.
Tell : (+86) 755-88834518
(Monday to Friday: 9:00-18:00)
Email : tanya@jitian168.com
Email : resin@jitian168.com
BUSINESS HOURS
Monday to Friday : 9 am to 6 pm
Saturday : 10 am to 4 pm
Sunday : Closed Support Hours in 24/7 Everyday
NEWS LETTER
Enter your email address for our mailing list to keep your self our lastest updated.
点击右上角
分享给朋友吧
© 2022 SHENZHEN JITIAN CHEMICAL CO.,LTD . All rights reserved Site Map
