Fluorescent Brightener APC J4802 It is suitable for whitening in coating and surface sizing
Main ingredients: Styrene-type derivatives
Exterior | Amber transparent liquid |
PH value | 8-9 |
density | 1.1 ~ 1.2g / cm3 |
Viscosity | ≤60mpa.s |
Ionic | Anion |
Solid content | 30% |
- Parameters
Exterior | Amber transparent liquid |
PH value | 8-9 |
density | 1.1 ~ 1.2g / cm3 |
Viscosity | ≤60mpa.s |
Ionic | Anion |
Solid content | 30% |
Product Describe
Main ingredients: Styrene-type derivatives
Physical and chemical properties:
Exterior | Amber transparent liquid |
PH value | 8-9 |
density | 1.1 ~ 1.2g / cm3 |
Viscosity | ≤60mpa.s |
Ionic | Anion |
Solid content | 30% |
Performance and characteristics:
Easy to use, miscible with water in any proportion, suitable for automatic continuous metering.
It has good acid resistance, even at a lower PH value, it also has excellent whitening effect.
Under normal temperature, it has good storage stability.
It is suitable for whitening in coating and surface sizing.
Compared with similar products, it has equal fastness to sunlight and fastness to acid and alkali.
Scope of application:
It is widely used in waterborne coatings, inks, adhesives, papermaking, paper coatings and other systems.
Fluorescent whitening is performed during the coating process.
Fluorescent whitening is performed in the surface sizing.
Fluorescent whitening in pulp
Instructions:
In the coating process, it can be added at any position. When used together with PVA, CMC, starch, it will get better results. The conventional dosage: 0.1 ~ 1.4% (total coating)
It can be used together with commonly used starch CMC and PVA in surface sizing to obtain better whitening effect, the conventional dosage is 1-20g / L.
Can be added directly in the pulp, the conventional dosage: 0.1 ~ 1.2% (for absolutely dry pulp).
Instructions:
In the coating process, it can be added at any position. When used together with PVA, CMC, starch, it will get better results. The conventional dosage: 0.1 ~ 1.4% (total coating)
It can be used together with commonly used starch CMC and PVA in surface sizing to obtain better whitening effect, the conventional dosage is 1-20g / L.
Can be added directly in the pulp, the conventional dosage: 0.1 ~ 1.2% (for absolutely dry pulp).
Comments
Properties reported here are typical of average lots. Jitian chemical makes no representation that the material in any particular shipment will confirm exactly to the values given.
Packaging and storage:
Packed in 50kg plastic drums.
REMARK |
Jitian Chemical shall not be responsible for the use of this information, or of any product, method, or apparatus mentioned, and you must make your own determination of its suitability and completeness for your own use, for the protection of the environment , and for the health and safety of your employees and purchasers of your products. No warranty is made of the merchantability of fitness of any product and nothing herein waves any of the seller's conditions of sale. |
Previous : Oil-based brightener J4804 Pale blue or milky white paints coatings and inks
Next : Fluorescent Brightener OB J4804 exhibits excellent resistance to heat exhibits exceptional high-temperature resistance
Copy product links
Long by picture save/share
INQUIRY
Add Successfully
At vero eos et accusamus et iusto elity agnissmos ducimus os quidtiis praesetium ptatum mole deeniti .
GET IN TOUCH
Address: M18-101, chemical zone, China south city, , shenzhen city, guangdong province, China.
Tell : (+86) 755-88834518
(Monday to Friday: 9:00-18:00)
Email : tanya@jitian168.com
Email : resin@jitian168.com
BUSINESS HOURS
Monday to Friday : 9 am to 6 pm
Saturday : 10 am to 4 pm
Sunday : Closed Support Hours in 24/7 Everyday
NEWS LETTER
Enter your email address for our mailing list to keep your self our lastest updated.
点击右上角
分享给朋友吧
© 2022 SHENZHEN JITIAN CHEMICAL CO.,LTD . All rights reserved Site Map
