Floor AB Adhesive (Bright Red) H0641 Highly resilient with strong adhesion strength plastic rubber and ceramics
This product is a two-component epoxy resin adhesive:
Component A and Component B (hardener) are widely popular polyamide resins characterized by high toughness, strong bonding strength, non-oily surface after drying, and excellent chemical resistance and corrosion resistance.
Shenzhen jitian Chemical Co., Ltd. - Floor AB Adhesive (Bright Red) | ||
Category | A (Active Ingredient) | B (Hardener) |
Color | White, transparent | Bright red transparent |
Appearance | Liquid | Liquid |
Viscosity (cP) | 11000~15000/25℃ | 9000~14000/40℃ |
Amine Value | 270±30 | |
Specific Gravity | 1.16±0.0220℃ | 0.97±0.02/20℃ |
Color (G/H Method) | ＜2 | ＜8 |
Active Hydrogen Equivalent (AHEW) | 190（EEW） | 125（AHEW） |
Mix Ratio | 100 | 70~100 |
Pot Life (100g at 25°C) | 70mins | |
Initial Set Time (Thin Layer at 25°C) | 4hrs | |
Hardness (SHORED) | 70~80 | |
Bond Strength (25°C/7 days) | (Iron plate/Iron plate) 77 kg/cm² | |
The above data is for reference only; actual results are subject to experimental verification. | ||
- Parameters
Shenzhen jitian Chemical Co., Ltd. - Floor AB Adhesive (Bright Red) | ||
Category | A (Active Ingredient) | B (Hardener) |
Color | White, transparent | Bright red transparent |
Appearance | Liquid | Liquid |
Viscosity (cP) | 11000~15000/25℃ | 9000~14000/40℃ |
Amine Value | 270±30 | |
Specific Gravity | 1.16±0.0220℃ | 0.97±0.02/20℃ |
Color (G/H Method) | ＜2 | ＜8 |
Active Hydrogen Equivalent (AHEW) | 190（EEW） | 125（AHEW） |
Mix Ratio | 100 | 70~100 |
Pot Life (100g at 25°C) | 70mins | |
Initial Set Time (Thin Layer at 25°C) | 4hrs | |
Hardness (SHORED) | 70~80 | |
Bond Strength (25°C/7 days) | (Iron plate/Iron plate) 77 kg/cm² | |
The above data is for reference only; actual results are subject to experimental verification. | ||
This product is a two-component epoxy resin adhesive:
Component A and Component B (hardener) are widely popular polyamide resins characterized by high toughness, strong bonding strength, non-oily surface after drying, and excellent chemical resistance and corrosion resistance.
II. Model Classification:
AB4H.AB2H.AB1H.AB1/2H.AB5min
III. Primary Applications:
1. General bonding of wood, metal, plastic, rubber, and ceramics;
2. Corrosion-resistant, chemical-resistant coating resins;
3. Civil engineering and construction applications.
Specification
Shenzhen jitian Chemical Co., Ltd. - Floor AB Adhesive (Bright Red) | ||
Category | A (Active Ingredient) | B (Hardener) |
Color | White, transparent | Bright red transparent |
Appearance | Liquid | Liquid |
Viscosity (cP) | 11000~15000/25℃ | 9000~14000/40℃ |
Amine Value | 270±30 | |
Specific Gravity | 1.16±0.0220℃ | 0.97±0.02/20℃ |
Color (G/H Method) | ＜2 | ＜8 |
Active Hydrogen Equivalent (AHEW) | 190（EEW） | 125（AHEW） |
Mix Ratio | 100 | 70~100 |
Pot Life (100g at 25°C) | 70mins | |
Initial Set Time (Thin Layer at 25°C) | 4hrs | |
Hardness (SHORED) | 70~80 | |
Bond Strength (25°C/7 days) | (Iron plate/Iron plate) 77 kg/cm² | |
The above data is for reference only; actual results are subject to experimental verification. | ||
Usage Instructions:
1. Place one portion each of Agents A and B (approximately 100 grams each) into a container. Mix thoroughly until uniform.
2. Clean or wipe the surfaces to be bonded. Apply the thoroughly mixed agents to the bonding surfaces and press firmly. Initial hardening occurs after 4 hours, with full hardening and a secure bond achieved within one week.
VI. Operational Procedure:
1. Cleaning: Ensure bonding/potting components are dry and clean.
2. Compound Mixing: Maintain precise proportions. This product's mixing ratio is 3:1 by weight (e.g., 30g Compound A + 10g Compound B). Thoroughly mix before use. For optimal results, vacuum degassing is recommended prior to application.
3. Application: Use mixed adhesive within its pot life to prevent curing and waste. Manage adhesive quantity and application time carefully.
4. Post-Use: Clean bottle openings after use. Securely cap both A and B containers as originally sealed to prevent chemical reaction. Store in a cool, dry location.
REMARK |
The above information is believed to be accurate and presents the best explanation currently available to us. We assume no liability resulting from above content. The technical standards are formulated and revised by customers’ requirement and us, if there are any changes, the latest specification will be executed and confirmed in the contract. |
Previous : Marble Flat Transparent AB Adhesive H0634 scratch resistance A new generation of flat adhesive developed specifically for nameplates
Next : AB Adhesive Fast-Curing Type H0608 Excellent chemical resistance and corrosion resistance Civil Engineering For Construction Use
Copy product links
Long by picture save/share
Floor AB Adhesive (Bright Red) H0641 Highly resilient with strong adhesion strength plastic rubber and ceramics
INQUIRY
Add Successfully
At vero eos et accusamus et iusto elity agnissmos ducimus os quidtiis praesetium ptatum mole deeniti .
GET IN TOUCH
Address: M18-101, chemical zone, China south city, , shenzhen city, guangdong province, China.
Tell : (+86) 755-88834518
(Monday to Friday: 9:00-18:00)
Email : tanya@jitian168.com
Email : resin@jitian168.com
BUSINESS HOURS
Monday to Friday : 9 am to 6 pm
Saturday : 10 am to 4 pm
Sunday : Closed Support Hours in 24/7 Everyday
NEWS LETTER
Enter your email address for our mailing list to keep your self our lastest updated.
点击右上角
分享给朋友吧
© 2022 SHENZHEN JITIAN CHEMICAL CO.,LTD . All rights reserved Site Map
